| Technical Data | Thickness （mm/100KPa） |
Basis Weight （g/㎡） |
MD Tensile Strength （KN/m） |
CD Tensile Strength （KN/m） |
MD Stiffness （Mg） |
Efficiency（%）0.3μm | Resistance（Pa）5.3cm/s | Water Repellency（mmH2O） |
| F6 | 0.33±0.02 | 76±4 | ≥ 1.0 | ≥ 0.5 | ≥ 850 | ≥ 30 | ≤ 20 | ≥ 300 |
| F7 | 0.33±0.02 | 76±4 | ≥ 1.0 | ≥ 0.5 | ≥ 850 | ≥ 40 | ≤ 30 | ≥ 300 |
| F8 | 0.33±0.02 | 76±4 | ≥ 1.0 | ≥ 0.5 | ≥ 850 | ≥ 55 | ≤ 45 | ≥ 300 |
| F9 | 0.33±0.02 | 76±4 | ≥ 1.0 | ≥ 0.5 | ≥ 850 | ≥ 80 | ≤ 70 | ≥ 300 |
| H10 | 0.33±0.02 | 76±4 | ≥ 1.0 | ≥ 0.5 | ≥ 1100 | ≥ 94 | ≤ 110 | ≥ 500 |
| H11 | 0.33±0.02 | 76±4 | ≥ 1.0 | ≥ 0.5 | ≥ 1100 | ≥ 98 | ≤ 160 | ≥ 500 |
| H12 | 0.33±0.02 | 76±4 | ≥ 1.0 | ≥ 0.5 | ≥ 1100 | ≥ 99.8 | ≤ 230 | ≥ 500 |
| H13 | 0.33±0.02 | 76±4 | ≥ 1.0 | ≥ 0.5 | ≥ 1100 | ≥ 99.95 | ≤ 290 | ≥ 500 |
| H14 | 0.33±0.02 | 76±4 | ≥ 1.0 | ≥ 0.5 | ≥ 1100 | ≥ 99.995 | ≤ 360 | ≥ 500 |
| Technical Data | Thickness （mm/100KPa） |
Basis Weight （g/㎡） |
MD Tensile Strength （KN/m） |
CD Tensile Strength （KN/m） |
MD Stiffness （Mg） |
Efficiency（%）0.16μm | Resistance（Pa）5.3cm/s | Water Repellency（mmH2O） |
| U15 | 0.35±0.02 | 76±4 | ≥ 1.0 | ≥ 0.5 | ≥ 1100 | ≥ 99.9995 | ≤ 420 | ≥ 550 |
Our liquid filtration media is one of our strongest product series for liquid filtration solutions, the main purpose is to provide good protection by removing fine particulates within the system while using less energy possible (pressure drop) and for a longer time as possible (dust holding capacity). Common materials used in hydraulic media are micro-fiberglass, resin-impregnated cellulose, and polyester. In addition, a hydraulic filter media may contain several layers of different materials depending on the requirements. The materials are combined and bonded together to provide a single composite filter media. High dust-holding / dirt-holding capacity Improved stability and strength Enhanced processability / pleatability High lifetime
